Modified on
12 Aug 2022 07:47 pm
Skill-Lync
A stiffness modifier is a modification factor that is generally used in the properties of cross-sections such as the moment of inertia, torsion etc., aiding in reducing the stiffness in concrete sections to model cracked behaviour of concrete. The stiffness modifier is applied only on concrete structures as it cracks on loading.
Analysis of structures on other structural elements are generally carried out by forces that depend on the stiffness of the member. Stiffness is defined as the rigidity of the member, or the capacity to resist deformation under the action of the applied load. These loads on structures exert internal forces, resulting in compression and tension in the concrete fibres that arise due to the cracking of the member.
In ordinary frame structures, the moment of inertia of the structural element is completely taken into account. Hence, the structural elements stiffen and tend to attract seismic forces. These forces would in turn generate cracks in the tension zone, thereby reducing the area of cross section and stiffness to the member. Subsequently, the moment of inertia would also drop more than that of the gross moment of inertia.
So, we need to assign a stiffness modifier to reduce stiffness, defining structural members as cracked sections. By applying stiffness modifiers, one can determine the capacity required in the members once cracked.
Earlier, the concept of stiffness modifiers was not taken into account in structural analysis, when IS 1893 (Part 1) - 2002 was in application. At this time, values were derived from different international standards, based on project requirements.
Now, in the latest codal revision of IS 1893 (Part 1) - 2016, the stiffness modifier is provided in Clause 6.4.3.1.
For structural analysis, the moment of inertia shall be taken as
The values suggested in the code were based on numerical experiments and taken from different international codes. The stiffness modifier of the column is higher than that of beam as the column has more axial compression than the beam. Thus, the extent of cracks is lesser in the columns as compared to the beam.
For ACI 318-14, refer to Table 6.6.3.1.1(a)
For column - 0.70 Ig
For beam - 0.35 Ig
For walls - 0.35 Ig for cracked and 0.70 for uncracked
For flat slabs and plates - 0.25 Ig
Ig - Gross moment of inertia
Author
Navin Baskar
Author
Skill-Lync
Subscribe to Our Free Newsletter
Continue Reading
Related Blogs
Through a graphical user interface, the user communicates with HEC-RAS (GUI). Making the software simple to use while still keeping a high level of user efficiency was the key goal while designing the interface.
05 Aug 2022
Ellipse is a fundamental component of a conic section and shares many characteristics with a circle. An ellipse is oval in shape as opposed to a circle. An ellipse is a shape with an eccentricity less than one that symbolises a group of points whose distances from its two foci are added up to a fixed value. Everyday examples of the ellipse include the shape of an egg as well as the race track in a sports field.
17 Aug 2022
Revit enables professionals to access design and rendering functions in an exceedingly single program. this enables the designs to be created within the identical software that renders the ultimate images.
02 Sep 2022
A topographic map, or toposheet, depicts a three-dimensional terrain area in two dimensions. Since topographic maps display the landscape's horizontal and vertical location, they set themselves apart from other types of maps. It uses a combination of colour, symbols, labels, contour lines, and other graphical elements for visual representation.
26 Oct 2022
Companies seek candidates who can differentiate themselves from the colossal pool of engineers. You could have a near-perfect CGPA and be a bookie, but the value you can provide to a company determines your worth.
04 Jul 2022
Author
Skill-Lync
Subscribe to Our Free Newsletter
Continue Reading
Related Blogs
Through a graphical user interface, the user communicates with HEC-RAS (GUI). Making the software simple to use while still keeping a high level of user efficiency was the key goal while designing the interface.
05 Aug 2022
Ellipse is a fundamental component of a conic section and shares many characteristics with a circle. An ellipse is oval in shape as opposed to a circle. An ellipse is a shape with an eccentricity less than one that symbolises a group of points whose distances from its two foci are added up to a fixed value. Everyday examples of the ellipse include the shape of an egg as well as the race track in a sports field.
17 Aug 2022
Revit enables professionals to access design and rendering functions in an exceedingly single program. this enables the designs to be created within the identical software that renders the ultimate images.
02 Sep 2022
A topographic map, or toposheet, depicts a three-dimensional terrain area in two dimensions. Since topographic maps display the landscape's horizontal and vertical location, they set themselves apart from other types of maps. It uses a combination of colour, symbols, labels, contour lines, and other graphical elements for visual representation.
26 Oct 2022
Companies seek candidates who can differentiate themselves from the colossal pool of engineers. You could have a near-perfect CGPA and be a bookie, but the value you can provide to a company determines your worth.
04 Jul 2022
Related Courses