Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

 DESIGN AND ANALYSIS OF A HOSTEL BUILDING AT GUWAHATI, ASSAM  AIM - TO STUDY THE DESIGN AND ANALYSIS OF A HOSTEL BUILDING AT GUWAHATI, ASSAM INTRIDUCTION - ETABS is an engineering software product that caters to multi strorey building analysis and design. SAFE represents the state of art in three dimensional…

  FOUNDATION DESIGN USING SAFE   AIM - TO STUDY THE FOUNDATION DESIGN USING SAFE. INTRODUCTION- CSI SAFE (Slab Analysis by the Finite Element Method) is the best tool for designing concrete slabs and foundations. SAFE provides easiness to engineers towards the safe design of structures with powerful…

Design of Shallow Foundations (isolated footing)   AIM:To design a square footing for a column size of 400x400 for given constraints and do the following check:• If the gross bearing pressure under the footing is within safe bearing capacity Provide sufficient depth and longitudinal steel for resisting bending…

           STRUCTURAL MODELING USING ETABS          AIM - To design a structural model based on provisions from IS 1893 and IS 13920 in seismic zone 5. To Run a modal response spectrum analysis and check analysis results of the Etabs model for inter-story drift requirements,…

         Analysis & Design of RCC shear walls in the model using ETABS                 AIM- To Study the Analysis & Design of RCC shear walls in the model using ETABS INTRODUCTION - ETABS is an engineering software product that caters to multi-story…

   Reinforcement Detailing of COLUMNS from ETABS output      AIM - To Study The Reinforcement Detailing of columns from ETABS output INTRODUCTION - ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load…

Reinforcement Detailing of Beams from ETABS output AIM - To Study The Reinforcement Detailing of Beams from ETABS output INTRODUCTION - ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load prescriptions, analysis methods, and…

COMPARATIVE STUDY OF DIFFERENT STOREY BUILDINGS FOR SEISMIC FORCES. AIM- TO STUDY THE COMPARATIVE STUDY OF DIFFERENT STOREY BUILDINGS FOR SEISMIC FORCES. INTRODUCTION - ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load…

  Modelling of 25 storey building with the specified properties using ETABS     AIM - TO STUDY HOW TO MODEL A 25 storey building with the specified properties using ETABS OBJECTIVE - To know the model of a high-rise building in ETABS software To verify the seismic code requirements from the ETABS…

CONCEPTUAL DESIGN OF A BUILDING WITH COLUMNS AND SHEAR WALLS AIM - TO STUDY THE CONCEPTUAL DESIGN OF A BUILDING WITH COLUMNS AND SHEAR WALLS OBJECTIVE - To investigate the suitability of the given plan concerning seismic behavior. To schematically draw a seismic viable structural plan. Question 1:The building shown, 20…

CONCEPT ON POSITIONING OF COLUMNS AIM- TO STUDY THE CONCEPT OF POSITIONING OF COLUMN OBJECTIVE - To understand the impact of vertical and horizontal members on the seismic behavior of a structure  To understand different irregularities in a building. Question 1: Comment on the layout of the framing plan concerning…

UNDERSTANDING THE CONCEPTS OF DEGREE OF FREEDOM AIM - TO STUDY THE CONCEPTS OF THE DEGREE OF FREEDOM OBJECTIVE - To understand modes and shapes of multi-story building  Manually calculate the base shear for a multi-story building in model analysis  Understand the terminologies involved in modal analysis. Question…

STRUCTURAL DYNAMICS AIM - TO STUDY THE INTRODUCTION OF STRUCTURAL DYNAMICS INTRODUCTION - Structural dynamics is a type of structural analysis that covers the behavior of a structure subjected to dynamic (actions having high acceleration) loading. Dynamic loads include people, wind, waves, traffic, earthquakes, and blasts.…

USAGE OF NAVIGATION TOOL, TIMELINER, AND CLASH DETECTION TEST USING NAVISWORK AIM - TO STUDY THE USAGE OF NAVIGATION TOOLS, TIMELINER, AND CLASH DETECTION TESTS USING NAVISWORK INTRODUCTION - Autodesk Revit is a building information modeling software tool for architects, landscape architects, structural engineers,…

  IDENTIFICATION OF CRACK   AIM - TO STUDY THE IDENTIFICATION OF CRACK INTRODUCTION - Crack is damage that often occurs in members of structures. It is the separation of an object or material into two, or more, pieces under the action of stress. Cracks in any structural systems are very common due to various…

CREATING CONCEPTUAL MASS IN REVIT AND CREATION OF SINUSOIDAL CURVE AND A PARAMETRIC STADIUM USING DYNAMO AIM - TO STUDY THE CREATION OF CONCEPTUAL MASS IN REVIT AND CREATION OF SINUSOIDAL CURVE AND A PARAMETRIC STADIUM USING DYNAMO INTRODUCTION - Autodesk Revit is a building information modeling software tool…

Creating Architectural and Structural models with 3D rendering using REVIT AIM -  TO STUDY THE USAGE OF COLLABORATION TOOLS IN REVIT  INTRODUCTION - Autodesk Revit is a building information modeling software tool for architects, landscape architects, structural engineers, mechanical, electrical, and plumbing (MEP)…

3D CREATION OF CEILING, ROOF, ARCHITECTURAL PLAN, STRUCTURAL PLAN, SECTIONAL VIEW, ELEVATION VIEW, AND CAMERA-SPECIFIC VIEW FOR A HOUSE PLAN USING REVIT   TASK 1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor…

CREATING WALLS, PARTITION WALLS, AND FLOORS FOR A RESIDENTIAL LAYOUT USING REVIT    AIM - TO STUDY THE CREATION OF WALLS, PARTITION WALLS, AND FLOORS FOR A RESIDENTIAL LAYOUT USING REVIT THE TARGET OF THESE PROJECTS IS TO SOLVE ALL THE TASKS GIVEN. INTRODUCTION - Autodesk Revit is a building information…

CREATING LEVELS, GRIDS, LAYOUT AND MODEL ELEMENTS FOR A RESIDENTIAL UNIT USING REVIT   AIM - TO STUDY THE CREATION OF LEVELS, GRIDS, LAYOUT, AND MODEL ELEMENTS FOR A RESIDENTIAL UNIT USING REVIT THE TARGET OF THESE PROJECTS IS TO SOLVE ALL THE TASKS GIVEN. INTRODUCTION - Autodesk Revit is a building information…

INTRODUCTION TO REVIT CONCEPTS   AIM - TO STUDY THE INTRODUCTION TO REVIT CONCEPT  THE TARGET OF THESE PROJECTS IS TO SOLVE ALL THE TASKS GIVEN. INTRODUCTION - Autodesk Revit is a building information modeling software tool for architects, landscape architects, structural engineers, mechanical, electrical,…

CREATING  A 3D RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD AIM- TO DRAFT A 3D VIEW OF BUILDING  USING AUTOCAD INTRODUCTION - The main objective of this project is to understand  AutoCAD 3D. AutoCAD is three-dimensional CAD software that is used commercially across the world. Developed by Autodesk…

CREATING 3D ISOMETRIC VIEW OF VARIOUS STRUCTURAL ELEMENTS IN AUTOCAD 1. 3D ISOMETRIC VIEW OF THE BUILDING WITH PLAN AND ELEVATION AIM- TO DRAFT A 3D VIEW OF BUILDING  USING AUTOCAD INTODUCTION - The main objective of this project is to understand about AutoCAD 3D. AutoCAD is three-dimensional CAD software that…

CREATING OF MULTIPLE VIEWPORT, SCALING THE DRAWING IN TEMPLATE IN AUTOCAD   1. CREATE A LAYOUT OF PLAN AND SECTION   AIM - TO DRAFT A LAYOUT OF PLAN AND SECTION USING AUTOCAD. INTODUCTION- The layout of plan and section A of the project in challenges 7  is created using a AutoCAD software. the template…

CREATING VARIOUS 3D MODELS LIKE FURNITURE, FOOTING, GRIDER, COLUMN DROP WITH PANEL AND GABLE WALL IN AUTOCAD 1. FURNITURE ELEMENT AIM- TO DRAFT A FURNITURE ELEMENT USING AUTOCAD INTODUCTION - The main objective of this project is to understand about AutoCAD 3D. AutoCAD is three-dimensional CAD software that is used…

CREATING KITCHEN LAYOUT,HATCHING OF ARCHITECTURAL ELEMENTS AND SEECTIONAL VIEW OF AN INDUSTRIAL BILDING IN AUTOCAD   1. KITCHEN LAYOUT AIM - TO DRAFT A KITCHEN LAYOUT USING AUTOCAD AND INSERT A DIMENSION AND HATCH WHENEVER REQUIRED. INTODUCTION- The KITCHEN detail drawing  is created using a AutoCAD software.…

CREATING BAR BENDING SCHEDULE, DIFFERENT DOOR TYPES, AND CREATION OF STANDARD DRAWING TEMPLATES USING AUTOCAD  1. TEMPLATES AIM- TO CREATE THE TEMPLATES AS SHOWN IN FIGURES USING AUTOCAD. INTRODUCTION -  The template is drafted  using AutoCAD software as per figures and sizes of the title block are taken…

CREATING AN ARCHITECTURAL PLAN FOR THE PROVIDED PLOT SIZE AND DEVELOP RELEVANT BASIC STRUCTURAL DRAWINGS AIM-  TO DESIGN AND DRAFT AN ARCHITECTURAL PLAN FOR THE PROVIDED PLOT SIZE AND DEVELOP RELEVANT BASIC STRUCTURAL DRAWINGS INTRODUCTION- The plan is drafted using AutoCAD software in the given plot size.The main…

CREATING A LAYOUT,SECTION AND ELEVATION WITH DIMENSION USING AUTOCAD 1. LAYOUT AIM-  TO DRAFT THE LAYOUT OF FIRST, SECOND AND THIRD FLOOR PLAN USING AUTOCAD. INTODUCTION-  The layout drawing  is created using AutoCAD software. The main purpose of this challenge is to be familiar with the annotation and dimension…

CREATING A WARDROBE DETAIL DRAWING,FLOOR PLAN, KITCHEN LAYOUT AND COLUMN DETAIL USING AUTOCAD   1.WARDROBE DETAIL DRAWING AIM- TO DRAFT THE  PLAN, ELEVATION, SECTION, AND DETAIL DRAWING OF THE WARDROBE IN AUTOCAD. INTRODUCTION- The Wardrobe detail drawing  is created using AutoCAD software. The main purpose…

CREATION OF COLUMN SCHEDULE AND DRAWING TEMPLATE USING AUTOCAD 1.CREATING A COLUMN SCHEDULE AIM- To create a column schedule  as shown in the above figure  in AutoCAD. INTRODUCTION - The column schedule is created using a AutoCAD software using many tools.The schedule  is drafted with some procedure, so…

CREATING A RESIDENCE LAYOUT, SEATING PLAN, TOILET AND UTILITY ROOM PLAN USING AUTOCAD. 1. RESIDENCE PLAN AIM- To Draft a layout of Residence Plan as shown in above figure using AutoCAD. INTRODUCTION - The residence plan layout is draft using a AutoCAD software using many tools.The plan is drafted with some procedure, so…

AIM: DRAFTING OF VARIOUS GEOMETRIES USING CHAMFER, FILLET TOOLS IN AUTOCAD INTRODUCTION: AutoCAD offers various tools to perform different tasks. The various tools which are used for drafting in this project are briefly described here. These tools include: - Modification tools: Chamfer, Fillet, Offset, Rotate, Object snapping,…

CREATING A FLOOR PLAN, FOOTING DETAIL, AND ISOMETRIC VIEW USING AUTOCAD     1) C.S. OF LOAD BEARING WALL OVER SPREAD FOOTING Aim:  To draw the cross-section of a load-bearing wall over spread footing.  INTRODUCTION : The cross-section area is given of load bearing wall over spread footing, our…

Create the geometries from P1 to P2 using all the coordinates system methods. You need to use the Line tool to create the geometries. Where required you need to use the circle tool. Please read the drawings and find out the missing dimensions before working on the sketches. Note: Use the Imperial Template and the Decimal…

Aim of the project- To sketch a G+1 floor residential plan according to Vastu Shastra and to list down the names of structural drawings required to be provided to the site for construction. To assume the size of structural elements (Column, Beam, slab, etc) and to calculate the loads from the members as per IS code. INTRODUCTION:…

PART 1 : Calculate the Concrete Mix Design for M35 grade concrete with fly ash .   AIM :  To prepare a concrete mix design of M35 grade Concrete with Fly Ash INTRODUCTION : Concrete mix design is a systematic process of choosing an economical relative proportion of various ingredients from available materials…